Fit for a Goddess

Despite the fact that I spent a LOT of time trying to get this one right (including special ordering that suede display device because the necklace just wouldn't photograph well against black), I must begin this post by telling you that more so than many of the photos I've taken recently, this one truly does not do this piece justice. It's warm, sparkly, elegant and delicate, all rolled into one (if you're reading this on the blog, click the pic for a closer look)! OK, that done, here's how it came to be.

The necklace is part of an order for a friend of my husband's in Albany - her son is getting married in October and she wanted two three-piece sets; one for the rehearsal dinner, one for the wedding. We actually got together back in May when I was in Albany for a show and she brought along the dress she'll be wearing for the wedding, which this necklace is meant to match. She'd emailed me with a general description of the colors included in both dresses, so I brought along a gallon-sized zip lock bag full of possible gem and pearl matches. The mauve pearls and the faceted smoky quartz beads were the two we matched to her wedding outfit. I filled in the spaces with other beads that I'd been tossing into a small basket when I came across them (and the little lightbulb came on for a good match). I've already got one set of earrings done and have an idea for another design I may try today (it's good to have choices!). My brain's been stewin' over the bracelet .. I could just do more of the same; but I'm inclined to make it match with a slightly different design. We'll see .. often times if I move on to something else, the right idea will fall into place simply because I've relaxed my brain about it. And there's still the second three-piece set to begin. This one in sterling. I'll keep ya posted (get it, POSTed?!?).

Anyway, this one's called Athena ... Greek goddess of wisdom, the arts, industry, justice and skill. Geeeez .... I hope she likes it!

Poetry & Rubies

I think I'm finally getting the hang of creating clear and crisp images for upload! Though I took about 15 to 20 images each of the two pics included here .. the necklace and earrings with multiple display devices (the one below was definitely the best) .. so there would have been some tantrum throwin' had I not gotten at least a couple good shots out of a morning's worth of photography!

Anyway, as promised, here are a few (what's left) of the finished 'Poetry Pendants" I fired. I made five of the "expletive deleted" and sold four of them at the Clayton show the last weekend in August. I kind of thought that might be a popular one, so I made a few more over the weekend. I also sold the elongated maple leaf with the crack in the center (shown in a pre-kiln state in "PMC Impressions"). I was wearing it at the time. I love when that happens.

Since I had some new and some completed PMC pieces, I thought you might like to see a PMC progression .. so the photo below includes two freshly cut pendants (top) that still need some drying time before I can begin to clean them up (I collected some white and red oak leaves over the long weekend and hope to cut several of those to add to the collection of items to be cleaned up and sanded over the next week or two. I also intend to make several more of the poetry pendants to dry, as well).

Directly below the freshly cut "wild" pictured upper left is a "wild" that's been dried, cleaned up, sanded, and had a fine-silver cylindrical bail added. If I did it right, when fired the pendant should shrink down with a little space still left on either side of the bail. We shall see. The three fine silver pieces are what they shrink down to once they're fired. I hung them all from sterling chains cuz it was quick for show purposes .. but now I kinda like the look .. the "all silver" thing.

I went out searching for some additional "word" stamps over the weekend and found a wonderful site with not only some great additional single-word stamps to add to the collection, but a couple sheets of short sayings. Won't know if they'll work as well as these until I get them; but I'm hoping even if they're smaller, I can figure something out. Discovered several additional websites with unusual art stamps, too ... bookmarked for later exploration. New ideas are already percolating.

I felt compelled to add the necklace below because I sold it at the Clayton show and still have it only because its new owner wanted it shortened. Before taking it apart, it was 19" of slightly graduated, faceted rubies with an 18k gold clasp, delicate little 18k gold spacers and 24k gold coated Swarovski crystals. A purty piece, to say the least. Since shortening it required removing beads, I suggested to my customer that I make earrings out of the extra beads. As it happened, there were 32 total beads removed from either side of the clasp ... and it seems I got a little carried away with these freebies. If you're gazing at this on my blog and not via a new post notification email, you can click on the pic and see it up close. The earrings look like little bunches of red grapes! And since the bead holes were SO incredibly small, I had to dig through my supplies to find 26 gauge gold-filled headpins (whew! glad I had 'em!). I'm glad I didn't offer to do them in 18k!! As it was, even taking into consideration the fact that the rubies were already paid for, just the gold filled materials alone would have amounted to about $38 retail (16 little connections on each earring tends to add up). If you added in the cost of the rubies, the retail value goes to $78. I'd say she got a discount on the price of the necklace, all tolled! By the way, I have another strand of these rubies (grin).




















The necklace is called Rubaiyat, which just seemed appropriate to me not only for the "ruby" aspect, but for the romance, and the Persian derivation (full of gold) and for one of the many translations I stumbled upon by Edward Heron-Allen, made in the late 19th century:

I desire a little ruby wine and a book of verses,
Just enough to keep me alive, and half a loaf is needful;
And then, that I and thou should sit in a desolate place
Is better than the kingdom of a sultan.

... from whence comes "a jug of wine, a loaf of bread, and thou ..." (an entirely different translation, but with such an ancient language, translations are bound to be diverse!)

A little romance, a little decadence .. it fit. I may have to make another one.

The Same .. yet Different

A friend of mine who'd been out here catching up on old blog entries saw the Fibula post I made a while back and sent me a link to a couple pieces from the website of the Smithsonian American Art Museum: Ramona Solberg . Hmmmm, says I .. that's kinda cool! And my first thought was this could be another way to show case some of the beautiful handmade lampwork glass beads I'd been collecting; my second thought was that unlike with the Thai Silver Leaf pin from the first Fibula post, I could do THIS version using gold-filled wire.

The thing about these pins is that in order for them to be strong and sturdy (and provide a nice spring in the pin part), a larger gauge wire is best. But when you start looking for beads that will actually fit on a heavier gauge wire, your prospects begin to decline. Most bead holes are tiny little affairs. Lampwork beads, however, are absolutely perfect for this application. The downside is they tend to be a little pricey. I mean they're made - one at a time - with colorful glass rods, a torch and a steel mandrel .. a tricky affair and much more difficult than you might think. And the glass artists who really have it down turn out the most amazing little pieces of glass!! I understand the cost aspect .. though I once wished I could learn to make the things myself to lessen the material cost of including them in my work. Alas, there's just no room in the studio for yet another set of tools and accoutrements! AND, to get to the level of some of these artisans would require givin' up all else for quite a while - even a few great lampwork bead makers have no time for making jewelry with their little works of art. If you're interested, here are a couple of my favorite sites (some of these sites have email "alerts" when new beads are available for sale .. if you aren't around when the email arrives, I mean right there to hear the thing come in with a 'ding', you miss out. With some of these sites, even ten minutes late, and the beads are all gone!). Bluff Road Glass - gorgeous sets, a couple hundred dollars a set (or more); Shibumi Glass - Round, flat, square, clear, rich and robust, Robyn Knapp's beads always causes severe decision-making stress; and Blue Iris Designs - you just know that when prices aren't visible, you shouldn't ask unless you're ready to do the deal!

Anyway, I babble. I was so excited about this slight variation on the fibula, that I created a bunch of 'em. Only a couple are in sterling; the rest are in gold-filled wire. I don't know if you remember the first pin with the big, gently curved Thai silver leaf; but the sharp pointy part of the pin slips beneath that little upturned part of the "shepard's hook". On this "new" version, the shepard's hook is turned towards the front and its entire large looped shape holds the sharp pin part in place.

Another little serendipitous event occurred when, while snipping and shaping the sharp pin point, I accidently snipped the shepard's hook and destroyed the whole pin as a result (whaddya gonna do, accidents happen). However, when I realized what I'd done and broke it apart to see what wire pieces could be salvaged for another project, I discovered that the squiggly wire part - with the addition of another hook at the top - would make a great new clasp! A clasp like this would work well for the Viking knit bracelets .. or even on a strand of pearls (though I'd probably use a finer wire gauge for that application).

And speaking of the Viking knit bracelets, another slightly different change on a current design is the addition of some gold pieces. I've only got four of them so far - dark blue, dark purple (think eggplant), and the red and black versions shown here. I found a nice, reasonably priced vermeil version of a short cone I could use on the ends. Since it's 24k gold over sterling, the gold in the cone is a bit more vibrant than the gold-filled wire clasp. But using gold wire is out of the question .. too soft and too expensive. It works as is (the red is particularly spectacular), so I'm putting them out at the Clayton show this weekend. I'll keep hunting for a gold-filled bullet or end cap; but I'd be very surprised to find one. And I was getting requests for gold versions, so I had to go with what I could find.

I can't remember if I've explained gold-filled wire before. I have a few "high gold" pieces containing 14k, 18k and a few 22k components; but most of my "gold" things are gold-filled. A perfectly acceptable alternative to gold .. and significantly better than plated materials, which involve a thin coat of a precious metal. Items made with gold filled wire are considered professional jeweler's quality and not fashion jewelry. 14k gold-filled wire is made by forming a tube of solid 14k gold which is then "filled" with a base metal. The gold is bonded to the base metal with heat and pressure. The base metal is also gold in color and is made up of almost the same mixture of metals (usually a brass alloy) used to bring 24kt gold down to 14kt, 10kt, etc. The exterior of the product is solid 14kt gold, and everything you can see or touch is a solid layer of 14 Kt. gold. This is why it will never tarnish, chip or wear off. The gold layer on gold-filled wire is approximately 100 times thicker than gold-plate and is bonded with heat and pressure. (Gold-filled wire is actually available in 10k, 12k, and 14k. In the symbol 14/20, the 14 stands for the karat of gold used and the 20 means 1/20 - the gold content is 5% or 1/20 of the total metal. I use only 14/20 gold filled components).

Oh .. I fired most of those PMC pieces earlier this week and have been tumbling, patinating, and tumbling some more hoping to be able to get most of the stuff into this weekend's show. No time for pics today, however. I'll take a few next week after all the hustle and bustle of preparing for the show are over. Everything turned out great .. can't wait to make a few more of the "poet pendants"!!

PMC Impressions

I know, I know .. I've been bad. I apologize for the great gap in posts, but tis the season to be out there gettin' it done, so blog time is on the back burner.

I AM very excited about some new Precious Metal Clay stuff I've been doing though, and thought I might just pop a photo up real quick so you could see what I've been up to (up to this point, most of what I've been pounding out are repeats of existing pieces and LOTS of those colored wire bracelets and necklaces .. so you haven't really missed much).

A couple exciting things have happened to get things moving on the PMC front: (1) I finally received my logo and business name stamps, and (2) I serendipitously discovered an incredible little "rubber stamp poet" kit at a local antique show a couple Sundays ago filled with the most wonderful word stamps!! And that's all it took!

You might have to double click on the photo above to get a closer look (can't do it from an email "post update" folks .. go to http://www.thewildinside.com/ and click on the photo there), but the small round piece on the bottom shows my logo stamp. I used Original PMC for these, as they'll shrink down about 25% to 30% and will be perfect little charms for the Viking Knit bracelets. The stamp with my business name .. using the same OzHandicraft font as all my business materials .. can be seen on the back of one of the word stamps in the lower right. That particular stamp - representing "obsenities deleted" - made the whole box full of 80 stamps worth the $6 I paid for it! I just know that I'm not the only one who has days that such a pendant would perfectly represent! The other two, "Wild" and "Juicy" were among my first experiments with the stamps. Every single stamp uses a different font; and they're the proper size for either Original PMC (which will shrink down to make smaller pendants) or PMC+ or PMC3 (which shrink only about 10% to 12% and would create slightly larger pendants). And there are enough wonderful words to keep me busy making pendants for a while: Moon, Mystery, Beauty, Dream, Passion, Dance, Secret, Fate, Laughter, Heart, Always, Magic, Imagine, Soul, Secret ... among others that can be combined on one stamp or doubled up and suspended on chain, leather, ribbon, etc. The possibilities are endless!!

I've poked jump ring holes into several of the pendants above to allow them to be suspended from whatever necklace material I choose; but "Wild" I left alone, as I think I might solder a fine silver tube bail onto that one. I'd like to try it at least once to see how it looks before getting crazy with that idea .. but I've only just recently found and ordered some fine silver tubing, so we'll see how it goes. The inside diameter of the tubing I ordered is relatively small; so I think they might only be appropriate for something easily threaded through them - like leather cord, rattail or ribbon.

The leaf is from a maple tree ... again I used Original PMC, so it'll end up being only about 1.5" long after it's fired. I was really pleased with the way this one turned out. I'd been trying to find a leaf small enough to impress, but who knew trees stopped growing in June!!! Sheeesh! So it's been a trial hunting up an example that was not only small enough, but which also hasn't been destroyed by various leaf-eating creatures. I rolled this one awfully thin (not recommended), so it'll be very delicate once it's fired. But the thing that got me especially excited is that I pressed a little too hard in the center where the largest "vein" in the leaf is located; and when the piece dried, it cracked through to the other side. Normally, this would be cause for disappointment. However, in this particular case, it makes the leaf look so much more real, that I couldn't believe my good fortune! However, it ain't over 'til it's fired ... so I'm crossing my fingers that it holds up in the kiln. Once it's fired, I'll be able to bend some of the leaf segments this way or that way so that it's not completely flat. It was so thin, I hesitated to get creative while it was still wet clay.

For anyone who thinks PMC is a "faster" way to make precious metal pieces, think again!! If you want your PMC pieces to look GOOD when they come outta the kiln, ya gotta spend some time with 'em before you pop 'em in there. Once they're dry (and while I have a hotplate I can use to excelerate the process, I prefer to let them dry on their own ... less rolling up on the edges that way), you have to clean them up - soften any rough edges and sand, sand, sand!! I have really fine micron-graded abrasive finishing paper from 3M that I use, beginning with 400 grit and working up to 8000 .. slowly, one grit at a time. The more time you take with this process, the happier you'll be when they come out of the kiln. If you don't do it at this stage, you'll have to do it when it's finished .. and it's a lot easier to sand leather hard PMC than fine silver metal!

OK .. that's all for now folks! Oh .. one more thing .. I have a show coming up in Clayton on the 25th and 26th (in the heart of the Thousand Islands, for those of you unfamiliar with the area) for the benefit of The Handweaving Museum and Art Center, so I've got to get busy and pound out a few new pieces. It's at the Recreational Arena in Clayton, right off route 12. If I have time, I'll post a couple of the new pieces ... the ribbon necklaces have been getting some attention, so I may pull out the colors I haven't yet used and see what I come up with.

Ciao for now!

Remember the NBC peacock?

In Living Color .. right?!?! The Baby Boomers among you will remember. It's that point in television history when a distinction between black and white television and color television was significant. And it seems I've made the same distinction!! That's what I've been doing for the last week or so .. ordering, and working with, colored wire! And boy, does it really(really!) dress up the Viking Knit pieces!

Today I hope to finish another necklace .. in dark blue with pale olive briolette dangles (I'm awaiting an order for more of those little bullet ends before I can complete it or any others). I'm also looking for a less complicated sterling slide for a slightly different pendant look. The pendant I used on the solid sterling piece, as well as the one on the left with the graduated peach jade briolettes, has ten little rings to which you attach beads. I'd like to find a nice slide with just a single ring beneath it .. maybe attach just a single stone or do a little multi-stone dangle with different colors and sizes (much like the bead burst pendants .. maybe a bit fewer beads .. two or three). I'm so excited about the possibilities I could just about explode! There are a couple colors I have on hand that haven't yet been made into anything, and a few new shades I ordered after a couple days of playing with the stuff ... matte lavender, purple, dark purple, red (hot cha!), and matte turquoise.

The bracelets below, while they look complete, are awaiting some sort of little charm(s). They look great as is .. I've worn each of them around already .. but a little dangle off the "eye" on the end adds a bit of interest. I ordered a stamp of my logo (the head with all the little elements popping out of it at the top of this page) to be used with precious metal clay; and I hope to make some little logo charms to attach to these funky, chunky style bracelets (the more delicate sterling jewelry tags just don't look right) .. perhaps together with a semi-precious stone. But, while I had expected the stamp to arrive by now, I'm still waitin' ... anxiously.

Anyway - from front to back - are matte olive, forest green, aqua green and dark blue shades. The shade differences are evident when you see them in person - and they're evident on my monitor, though perhaps not on yours. The wire is "permanently colored copper" .. baked on, per the company from whom I purchased it. Though I did discover that the color can be scratched off with a bit of careless plier action, it does hold up surprisingly well through the process of drawing the finished weave through my rosewood drawplate .. multiple times! So I have no qualms about continuing to use it for these purposes. I can't imagine anyone scratching the color off during normal wear; I even wore multiple chunky pieces along side for several days, with no problem. The rest of the piece is sterling.

And speaking of sterling, beginning in early 2008 I expect to start collecting a stock of Argentium sterling to use in these and other pieces. Argentium is a relatively new version of sterling - sterling silver being defined as 92.5% pure silver and 7.5% other metals. Argentium is simply a modern adjustment to the sterling formula. It's still 92.5% pure silver; but it replaces some of the traditional 7.5% copper with a rare metallic element called Germanium. In general this results in a change in sterling's tendency to tarnish under normal use and to form oxides while it is being heated and worked. It's much closer to fine silver in its ability to resist tarnish .. which is nice, for those designs you'd love to remain bright n shiny.

I've put off participating in the whole Argentium craze because (1) it's more expensive than traditional sterling (and even traditional sterling is still relatively pricey these days); (2) the longer it's out there, the more information gets circulated with regard to its properties and peculiarities; and (3) initially only sheet and wire were available in this new medium - while one can now find Argentium earring findings, beads, bezel wire, etc.

In the interim, I've got a whole lotta traditional sterling to get through first! But those of you who are annoyed by the slow tarnish of your favorite silver pieces, keep a look out here for pieces made with Argentium .. next year around this time.

One more bit of news - I finally set the wheels in motion for a real website .. with pricing and a shopping cart and everything. However, I'm not expecting miracles. I'm using the same folks to do the programming who did The Remington Museum when my husband took over and decided the website needed updating ... and it took nine months to get theirs up and running. I try to keep in mind that my site won't be nearly as big or complicated, so perhaps by January the shell will be complete and I can begin loading photos and pricing and be on my merry e-commerce way! Time will tell. The woman who designed my logo, business cards and stationery is doing the design side .. she and the programmer will get together once I've settled on the design I prefer. And while all this is going on, I've got some decisions to make about what to ultimately put up .. and then there are ALL those photographs to take. Yep .. lots to be thinkin' about, lots to be doin'. I'll keep ya posted.

Ciao for now!

Solid Sterling Bangle

Ta dah!! This is what the bangle in my last post looks like with sterling beads in place of the blue India glass. I used a shorter core wire this time, a slightly shorter focal "bead" (that elaborate wire piece in the center) and shortened each of the four twisted wire segments; and, while it fits a bit better than the blue version, it's still a little oversized for me. But my wrists measure a little under 5.5". So, I will, of course, keep tryin'!

Though I'm wondering if this bangle just wasn't meant for me. The larger gauge wire core and clasp provide a sturdy base on which to wrap wire and slide interesting beads .. but I've been toying for awhile with the idea of trying a significantly smaller gauge for a lighter, more delicate bangle design. Not necessarily THIS design .. but something incorporating some interesting little precious metal clay beads, smaller gauge twisted wire, etc. The idea is still stewin' for the moment .. so keep watch.

Temporarily back on track ..

As all the massage, stretching and pressure point triggers were slowly working to relieve the Repetitive Strain Injury in my left hand, I got a little crazy this past week and churned out a bangle. If you check a post in May labeled "Silver is a nobel metal" you'll see a pic showing a couple others I made a while back .. quite a while back, like 2004, I think .. before we moved back to the North Country. Before I had the studio set up here I couldn't make twisted wire (the four smaller seqments on this bracelet) .. while in my temporary digs I had no place to attach a vise to hold on to one end of a length of doubled-up wire.

I've been wanting to get back into making these ever since. Got side-tracked with a whole buncha other stuff .. it happens. So many new things pulling in multiple directions .. sometimes it's difficult to focus .. for me anyway. If I was three people, it probably still wouldn't be enough to head off in all those different directions! ; )

Anyway, it's just like me to wait until the most inopportune time to do something inappropriate. There's a whole lotta wrist-wrenching necessary to make one of these - not necessarily during the wire-twisting part, but definitely during the part that requires you to wind the twisted wire (and in the case of the larger wire focal bead, half-round wire) around a wire mandrel. Dead soft wire, which is what I use for these, will get "work hardened" if you hammer, twist or otherwise manipulate it in some way. So dead soft wire, doubled up and then twisted is no longer dead soft .. and it's a bit more difficult to manipulate. And the core wire, the wire on which everything is "strung", is 12 gauge. Takes quite a lot of power to make the "eyes" at the end which contain the clasp. Silly girl .. don't know what I was thinking. But I plodded on and completed the thing. Only to have to ice my wrist when it was done. ; )

It was so worth it as it turned out great! I'm out of practice though and am already thinking of doing another to try getting back into the swing of it. This one's too big for me .. in fact, it slips right over my hand, even with the clasp in the closed position .. so I'm anxious to make another that will fit. And I may do another that includes large round sterling beads instead of the blue India sand glass. I just don't learn, do I! Sometimes enthusiasm can be a dangerous thing!

OK .. off to do Sunday chores so I can get back to SOMEthing productive on Monday ... got several knotted pearl orders awaiting completion (waiting for some materials to arrive for one or two). A much less strenuous task, as I think I've mentioned.

But my wire beckons ....

Maternal pride

I don't generally advertise or promote the fact that I make these, but I love makin' 'em! Mostly because the women for whom they're meant wear 'em to death : ) It's difficult not to love a piece of jewelry with your child's (or grandchild's) name on it. Trust me .. I've had to restring more than a few of these due to wear n tear.

Both of these examples went to the same woman .. CALEB was a gift from me and my husband to his Administrative Goddess at the Remington Museum when she had her son in the spring of 2006; BRIELLE was a gift from her to her partner's sister, who just had a baby in March (the pale blue crystals represent aquamarine, the traditional birthstone for March).

As the first one was a gift from us, I was at liberty to get a little crazy - hence the vermeil (pronounced ver MAY) beads, the addition of the little gold-filled jump rings that move around freely (you'll probably have to double click on the pic to see them), and the heart-shaped lobster clasp. (Vermeil, by the way, is 24k gold over sterling .. at least that's the traditional definition).

I've got a ton of those little sterling alphabet beads, so I'm always happy to accept a special order for one. I made a spectacular double-stranded version for my sister-in-law several years ago that made her cry - happy tears, of course ; ) So .... if you're wondering what to get your mom or sister or other important female personage in your family, these things always make a big hit! Good for scoring points, big time! : )

What's a Weir??

I just had to share this one with you! This is a cropped view of a picture I snapped out my studio window .. though I will no doubt go to hell for having taken it. I've never actually asked permission to take their photograph (though there have been many occasions when a shot begged to be taken), but as I understand it it's verboten. But there they were .. right in our "front yard." Couldn't resist. Took it through the window screen.

That's Cara on the right .. she thought they were in her yard, too, as it was her barking about it that brought me to the window.

Apparently it has always been the case that the fishing is pretty darn good on "Eel Weir" (pronounced "wire" locally), and the Amish can be opportunists when the situation allows. We've seen a Great Blue Heron out there catching fish, too ... and as anyone with a pond knows, Herons KNOW where the fish are!

For an interesting rendition of the job an eel weir performs, check out this site. And this is OUR particular Eel Weir .. my husband tells me (he's the historian here) eels caught at this sight used to go to upscale restaurants in NYC. In another time, long ago and far away.

OK .. beads beckon! : )

Back to the Basics

After several weeks of some ache and discomfort in my wrist, I did a little research online and discovered that I seem to be suffering from an RSI - Repetitive Strain Injury. When you consider all the computer work and wrist wrenching that goes on in my studio, it's really quite amazing that it hasn't happened sooner. What I found online was a whole host of maladies that fall under this RSI heading, the most well-known being carpal tunnel syndrome. When my thumb began to occasionally feel numb about a week ago, I then went in search of some self-care sites. I found and have been using some stretching exercises, acupressure points and massage techniques - all of which have helped. Despite minor progress I made an appt. with an orthopaedic guy in town .. though as he's only IN town twice a week, I can't get in until June 13. So let us hope the things I've been doing continue to help and not hinder the situation.

In the interim I've been lightening up quite a bit in the shop .. there are several projects sitting half completed as they involve a lot of wrist wrenching activities. So .. it's back to basics for a while. I figure it took me three to four weeks to get to this uncomfortable point - it may take as long, or longer, to regain my strength and banish whatever is causing the discomfort. I'm thinkin' there are gonna be a lotta pearls and beaded things comin' outta here in the next coupla weeks! : )

The necklace above was completed during my artisan guild's Open House celebration at the Shops at 25 West in Little Falls on Sunday, May 20. Not a lot of pain in knotting. I finished it up here in the shop with a couple 14k jump rings and a 14k gold handcrafted "swan" clasp. The pearls are 5.5mm to 6mm cultured fresh water pearls in a color called Marine Teak - a really rich coppery brown shade - knotted on chocolate silk cord. As usual, if you're reading this on my blog and not in an email, you can click on the pic for a closer look.

Another thing I have to do is keep these posts short (my husband is no doubt laughing at the thought of my trying to do that ) .. I think it was computer activity and not jewelry work that did it. So I'm off to dig into some bead drawers and see what wonders are waiting to be rediscovered!

Ciao for now!